Landscapus Inc

Landscapus Inc

Thermoplastic ROAD MARKING PAINTS
EN 1871:2000

TECHNICAL DATA SHEET (TDS)

WHITE & YELLOW

General

This specification / requirements is covering the purchase of reflective Thermoplastic paint for road marking for white and yellow color lines and horizontal traffic signs.

Material

The materials shall comply with the EN 1871:2000 standard – Road marking materials physical properties.

Technical Characteristics

Characteristic, Relative Paragraph of ΕΝ 1871:

White

Yellow

Chromatic coordinates - 4.2.1.1

Table 2-White

Table 2-Yellow

Class of luminance Factor β, 4.2.2.1 -Table 5

LF4(β≥0,70)

LF1(β≥0,40)

Softening Point,4.2.1.2 - Table 6

SP3((≥95°C)

SP3((≥95°C)

Cold Impact,4.2.1.4 - Table 7

Cl2

Cl2

UV Aging,4.2.1.5-Luminance Factor-Table 3

UV1((Δβ≤0,05)

UV1((Δβ≤0,05)

UV Aging,4.2.1.5-Chromaticity Coordinates-Table 2

Table 2-White

Table 2-Yellow

Heat Stability,4.2.3.1- Chromaticity Coordinates - Table 2

Table 2-White

Table 2-Yellow

Heat Stability,4.2.3.2 - Softening Point

ΔSP≤±10°C

ΔSP≤±10°C

Weather Resistant,4.2.2.4 - Table 9

TW2( 2,5 – 5,0)

TW2( 2,5 – 5,0)

Weather Resistant(after UV aging) 4.2.3.6 -         Table 10

TWU1(0 to 0.5)

TWU1(0 to 0.5)

Additional to the above requirements the offered Thermoplastic paint shall appear the below properties / performance, in use that are designated in EN 1436:2007 +A1 Road Marking Materials – Road Marking Performance for road Users:

Characteristic, Relative Paragraph of ΕΝ 1436:

White

Yellow

Luminance coefficient under diffuse illumination in dry conditions

4.2.2 Table 1

Q3 (Qd≥130)

Q2(Qd≥100)

Retroreflection under vehicle headlamp illumination, Dry road Markings, 4.3, Table 3

R4(RL≥200)

R3(RL≥150)

Chromatic coordinates, 4.4, Table 6.

Table 6-White

Table 6-Yellow class Y1

Skid Resistance.4.5, Table 7

S2(SRT≥45)

S2(SRT≥45)

Composition of the Thermoplastic paint

The pigment, the glass bead the filler shall be uniformly spread in the resin and complies to the below Table:-

Composition of the Thermoplastic paint % per mass

Component

White

Yellow

Red

Binder

18.0 min

18.0 min

18.0 min

Glass Beads – According the

ΕΝ 1424:1997/A1:2003

30-40

30-40

30-40

Calcium Carbonate and inert Fillers

42 max

42 max

42 max

Titanium Dioxide – According to ASTM D476 Type II(Rutile)

10.0 min

-------------

--------------

The granulometry of the Glass Beads that are spread in the Thermoplastic paints shall be as per below Table:

Sieves ISO 565:1990 R 40/3 - μm

Cumulative retained mass (%)

710

0-2

600

0-10

355

30-70

212

70-100

125

95-100

The maximum acceptable of faulty Glass Beads shall be 20% per weight.

The reflective coefficient shall be above 1.5.


Chip Seal Markers:

Raised pavement Markers, plastic road markers,Road Markers, Road studs, chip seal markers, chip seal markers(TRPMs), temporary chip seal markers, flexible chip seal markers (TRPMs), Chip Seal Temp Markers, TRPMs-Temporary Raised Pavement Markers, TRPMs-Temporary Chip Seal Markers, Temporary Pavement Marker Tabs,chip seal pavement markers, reflective road markers, glass road markers, ceramic road markers, EN1463, ASTM D4280, 43 Glass Beads reflectors, cat eyes, glass cat eyes, Signalisation Temporaire/Panneaux Routiers Temporaires,Plots Rétro-reflechisssant,Temporaire de chaussée en relief marqueur


Road Marking Glass Beads:

Glass Beads for road marking paint, glass beads for road marking, pavement marking glass beads,Drop On glass Beads, Intermix Glass Beads, Premix Glass Beads, highway safety marking glass spheres, glass microspheres, reflective glass beads,all weather beads, high retroreflective beads, high refractive index glass beads,pavement marking, pavement road marking, reflective glass beads for road marking, road marking glass beads, pavement marking & beads, retro reflective drop on glass beads for road marking, glass beads for traffic marking paint, thermoplastic road pavement marking, road marking material,highway safety marking, road markings, EN1423 Drop on glass beads and anti-skidding Aggregates, EN1424 intermix glass beads, BS 6088 Class A intermix glass beads, AASHTO M247 Glass Beads, TT-B-1325D glass beads, Glass beads for road marking,Road Marking Glass Beads, AS/NZS 2009:2006, KSL-2521 Glass Beads, JIS R3301-1987, CNS4342 Glass beads,NBR6831-Glass beads, P98-660-1997 Glass Beads,TIS-543-2550 Road Marking Glass Beads, EN1423 Turkey Glass beads, TT-B-1325D airport marking

PREVIOUS:Knowhow for Landscapus Inc Group
NEXT:BS 3262 Thermoplastic Road Marking Paint

RELATED POSTS



Skype

WhatsApp

Email me

Mail to us