Landscapus Inc

Landscapus Inc

Temporary Raised Pavement Marker Tabs(TRPMs)

    Product Item: Temporary Raised Pavement Marker Tabs(TRPMs)
    Category: Chip Seal Markers
    Views: 1124
    Product Manual:TRPM--TEMPORARY RAISED PAVEMENT MARKER TABS ,Chip Seal Markers, Road markers, road studs, raised pavement temporay markers,Temporary Raised Pavement Marker Tabs(TRPMs)

    Attachment Inquiry

    You can make an inquiry about this product.
    Your e-mail will not be leaked.

    • PRODUCT DETAIL


    TRPM--TEMPORARY RAISED PAVEMENT MARKER TABS

    (CHIP SEAL MARKER)

    1, Types:

    Type Y—yellow marker with amber reflective area on one side

    Type Y-2—yellow marker with amber reflective area on both sides 

    Type W—white marker with white or silver reflective area on one side

    Type W-2—white marker with white or silver reflective area on both sides 

    2, Body Size:

    2.1 The body of the marker consists of a base and vertical wall made of polyurethane.

    2.2 The base is 100mm (4in.) in length and from 25 mm(1 in.) in width.

    2.3 A butyl rubber adhesive pad with an easily removed protective covering is affixed to the bottom of the base. The adhesive pad must be approximately 3 mm (1/8 in.) thick, 19 mm (3/4 in.) wide, and 100 mm (4 in.) long.

    2.4 The vertical wall is 100mm (4in.) long with a height of 51 mm (2 in.) A reflective material is affixed o the upper portion of the vertical wall ,The reflective material is 8mm (1/3 in.) in width and 100mm in length.

    2.5 The reflective material is protected with an easily removable cover of heat resistant PU capable of withstanding and protecting the reflective material from the application of 204°C (400°F) asphalt.

    3, Color:

    white or yellow as specified

    4,Flexibility and Deformation Resistance:

    The vertical wall of the tabs is sufficiently flexible to bend under normal traffic and sufficiently resistant to permanent deformation, to be conducted when air temperature is above 10°C (50°F).

    5, Retro-reflective characteristic (ASTM D 4956-04 Type III):

    Min Coefficient Of Retroreflection (Min: Cd/lux/㎡)

    Specific intensity

    Observation Angle

    Entrance Angle

    White

    Yellow

    White

    Yellow

    0.2

    -4

    570

    425

    3.7

    3.1

    0.5

    -4

    400

    300

    1.0

    -4

    120

    90

    0.2

    30

    215

    160

    2.8

    2.0

    0.5

    30

    150

    112

    1.0

    30

    45

    34


    

    Skype

    WhatsApp

    Email me

    Mail to us