Landscapus Inc

Landscapus Inc

Landscapus Inc has been the proven leader of thermoplastic paint and glass beads for road markings for over 10 years. Our products are used worldwide to provide superior retro-reflectivity for highway and airfield pavement markings.
Pavement markings offer significantly greater target value for drivers and pilots. Therefore,the need for brighter pavement
markings is essential to complementing your safety systems. Thus we offer you three kinds of solutions listed below
for your choices:

Normal usage volume for
Thermoplastic Road Marking
Materials (Screed / Extrude)
Thickness Lbs Per Square Meter
1.5mm 12.0lbs
1.8mm 13.5lbs
2.2mm 14.5lbs
3.0mm 22.0lbs
3.3mm 24.0lbs
Road Marking Methods: Spray,
Extrude, Screed. Spraying Road
Marking using volume will be little
less than Screeding and Extrusion
Methods.


Steps For Using Thermoplastic Road Marking Paint:
1.Materials: Thermoplastic Road Marking Materials (ALKYD Binder, Hydrocarbon Resin), Glass Beads, Base
Paint (Sealer)
2.Heating: Heating the thermoplastic Road marking materials in the road marking machine or Preheating container
for melting, the temperate should be kept at 180 to 220 centigrade after melting and stiring for 10 minutes before
marking. Choose the road marking machines: Extrusion , Spray and Screed according to low viscosity (Spray < 2,
low viscosity <4.5 in BROOKfiled heater) and extrude type (4.5 to 10).
3.Marking And Measurement: Marking the exact place, symbols and sign according to the design then put the base
paint on the sign.
4.After drying of the base paint, do the thermoplastic road marking and glass beads Dropping On by road marking
machines.
5. Drying: After 3minutes, the road marking lines will be dry and the cars can pass. For your safety, Please Do not
move the fence untill you complete all work!


Drop On Of Road Marking Glass Beads
High Light Large Beads These beads are made of the virgin glass by direct-melt method with the roundness of
more than 90%,which can give much higher retro-reflectivity in wet night. 500grams/M2


TT-B-1325DType III Type III (1.93) glass beads offer superior retro-reflectivity utilizing high index bead
technology resulting in the maximum return of light. 800-1200mcd/m2/Lux, drop on rate 450grams/m2


All Weather Beads All weather beads are glass beads elements which can be used in wet nigh road marking which
can give high Retro-reflective more than 700mcd in white line and 500mcd in yellow line. It can be used by
intermix and drop on (Double drop 400grams/Square meter with normal grade glass beads 300grams/Square meter)


* Proper application, quality materials, proper material usage, calibrated equipment, proper sphere distribution
and embedding are all crucial items for effective pavement markings and their performance.


Chip Seal Markers:

Raised pavement markers, plastic road markers,Road Markers, Road studs, chip seal markers, chip seal markers(TRPMs), temporary chip seal markers, flexible chip seal markers (TRPMs), Chip Seal Temp Markers, TRPMs-Temporary Raised Pavement Markers, TRPMs-Temporary Chip Seal Markers, Temporary Pavement Marker Tabs,chip seal pavement markers, reflective road markers, glass road markers, ceramic road markers, EN1463, ASTM D4280, 43 glass beads reflectors, cat eyes, glass cat eyes, Signalisation Temporaire/Panneaux Routiers Temporaires,Plots Rétro-reflechisssant,Temporaire de chaussée en relief marqueur


Road Marking Glass Beads:

glass beads for road marking paint, glass beads for road marking, pavement marking glass beads,Drop On glass Beads, Intermix Glass Beads, Premix Glass Beads, highway safety marking glass spheres, glass microspheres, reflective glass beads,all weather beads, high retroreflective beads, high refractive index glass beads,pavement marking, pavement road marking, reflective glass beads for road marking, road marking glass beads, pavement marking & beads, retro reflective drop on glass beads for road marking, glass beads for traffic marking paint, thermoplastic road pavement marking, road marking material,highway safety marking, road markings, EN1423 Drop on glass beads and anti-skidding Aggregates, EN1424 intermix glass beads, BS 6088 Class A intermix glass beads, AASHTO M247 Glass Beads, TT-B-1325D glass beads, Glass beads for road marking,Road Marking Glass Beads, AS/NZS 2009:2006, KSL-2521 Glass Beads, JIS R3301-1987, CNS4342 Glass beads,NBR6831-Glass beads, P98-660-1997 Glass Beads,TIS-543-2550 Road Marking Glass Beads, EN1423 Turkey Glass beads, TT-B-1325D airport marking glass beads,Wet Night Glass Beads, all weahter beads, high-retroreflective-beads, Airport marking glass beads, high refractive index glass beads, TT-B-1325D Type 3, airport pavement marking, airport runway marking, highway marking beads NBR6831 Glass Beads, AS/NZS 2009:2006 glass beads, Standard Highway Safety Marking Spheres (Highway Marking Glass Beads),perles de verre,billes de verre,microbilles de verre


Traffic paint and machines:

Thermoplastic road pavement marking, road marking material, traffic marking paint, thermoplastic paint white, thermoplastic paint yellow, hot-melt traffic paint, MMA cold plastic, 2 component traffic paint, water borne traffic paint, solvent base traffic paint, water base traffic paint, road marking paint, pavement marking paints, titanium dioxide rutile for thermoplastic, chrome yellow for thermoplastic, c5 resin for thermoplastic, c5 hydrocarbon resin, PE wax, BS3262, EN1871, AASHTOM249, AS-NZS 2009 traffic paint,preformed thermoplastic, reflective pavement marking tapes, Pavement Marking Tape, Reflective Pavement Marking Tapes rolls, road marking tapes,High Friction ceramic granular, Glass beads, glass grits, anti-skidding ceramic granular, anti-skidding materials.anti-skidding aggregates,Road Marking Machines, pavement marking machines, road marking, pavement marking, striping machines ,Road Marking Machines


PREVIOUS:AASHTO ALKYD Thermoplastic Road Marking Paint
NEXT:Global Standards For Road Marking

RELATED POSTS



Skype

WhatsApp

Email me

Mail to us